Sony PCG-NVR23 - Manual (Page 74)

To connect two VAIO computers
1. Connect one end of the i.LINK cable to the i.LINK port on each computer.
2. Click Start on the Windows ® taskbar, and click Control Panel.
3. Click Network and Internet Connections, and click "Set up or change your home or small office network." The
Network Setup Wizard window appears.
4. Follow the on-screen Network Setup Wizard instructions.
When the Network Setup Wizard prompts you to name the computer, type in a unique name. You will use this
unique name to differentiate the two computers once they are networked together.
The Network Setup Wizard will also prompt you to name your network. Make sure the Workgroup name is the same
for the two networked computers.
5. When you finish the Network Setup Wizard on-screen instructions, click Start on the Windows ® taskbar and click
My Computer.
6. Click My Network Places in the Other Places menu. The My Network Places window appears.
7. Click "View workgroup computers" in the Network Tasks menu. The computers that are networked under the
same Workgroup name are displayed in this window.
Page 74