Sony MSAC-US30 - Manual (Page 83)

22-GB
Connecting this unit to your computer
P Note
Be sure to install the supplied software before you connect this unit to your
computer. Restart your computer following installation.
Connect the USB jack on this unit to a USB jack on your computer using
the special USB cable supplied.
On the special USB cable
A connector: This is plugged into the USB jack on the computer. Any of
the jacks can be used if the computer is provided with
multiple USB jacks.
Mini-B connector: This is plugged into the USB jack on this unit.
1
Firmly insert the Mini-B connector of the USB cable into the
USB jack on this unit as far as it will go.
2
Plug the A connector of the USB cable into a USB jack on your
computer.
• The “Found New Hardware Wizard” starts up and installation of
the driver begins. Depending on the OS, the driver installation may
take place automatically.
• The location of the USB jack on the computer differs with the
computer used.
• When using a computer with multiple USB jacks, do not connect
other devices, with the exception of a standard mouse and keyboard,
to USB jacks at the same time as this unit. When using a desktop
computer, use a USB jack on the main unit of the computer. For
details, see “Recommended ways for connecting this unit” on page
23.
USB jack
A connector
Mini-B
connector
Access lamp
USB jack
* Serial number
(7-digit number on the
backside of this unit)