Sony HMZ-T3W - Manual (Page 29)

29
3D Settings
Reset Resets all “3D Settings” items to the original default
values.
3D Display Manually select the display format for 3D content.
Available settings vary depending on whether the
source signal includes a 3D format identification signal,
as follows.
For 3D content without a 3D format identification
signal
Side-by-Side: Select for side-by-side 3D content, with
similar images displayed side by side.
Off: Select to display content in 2D format.
Over-Under: Select for top-and-bottom 3D content,
with similar images displayed on top and bottom.
For 3D content with a 3D format identification signal
On: Select to display content in 3D format.
Off: Select to display content in 2D format.
• If 3D content is not displayed correctly using the selected
settings, try changing “Side-by-Side” to “Over-Under” or
vice-versa.
• When selecting “Side-by-Side” or “Over-Under,” change the
setting to “Off” after viewing 3D content.
Example of 3D display
Notes