Sony HMZ-T3W - Manual (Page 35)

35
General Setup
Set password
Cancel password
“Set password” is not
available when a
password has been set.
“Cancel password” is
not available when no
password has been set.
A password can be set to restrict use of the system.
Once a password is specified, it must be entered each
time the system is turned on.
To cancel password protection, select “Cancel
password” and enter the password.
• The system automatically turns off in the following
situations. Either turn the system on and enter the password
again or cancel password protection.
– When the password is entered incorrectly, and you close
the displayed setting menu by using the
 button
– After 90 seconds of inactivity on the password input screen
Input
Not available when the
processor unit is
disconnected.
Selects the input to the processor unit. The signal input
to the selected input jack is displayed on the head
mounted unit.
HDMI1: Input via the HDMI IN 1 jack
HDMI2: Input via the HDMI IN 2 jack
HDMI3: Input via the HDMI IN 3 jack
HDMI Dynamic
Range Selects the video signal input level.
Auto: The system automatically detects the input level.
Normally set to “Auto.”
Full: Select this option when the highlights in the image
are blown out or the shadows are blocked.
Limited: Select this option when the highlights in the
image are dull or the shadows are outstanding.
HDMI pass-through
Not available when the
processor unit is
disconnected.
On: Activates pass-through, enabling you to watch or
listen to content on a TV or other display device
when the system is in standby mode. For details,
refer to the “Startup Guide.”
Off: Deactivates this function. To save power, select
“Off” when a TV or other display device is not
connected to the processor unit.
Note