Sony HMZ-T3W - Manual (Page 34)

34
DTS Neo:6 Selects matrix decoder operation. You can easily enjoy
surround effects even when the input signal is in 2
channels, simply activating the matrix decoder.
Cinema: Performs Cinema-mode processing of DTS
Neo:6.
Music: Performs Music-mode processing of DTS Neo:6.
Off: Deactivates the matrix decoder.
• “DTS Neo:6” is fixed at “Off” if the “Dolby Pro Logic IIx”
setting is not “Off.”
Treble Adjusts high-frequency audio output.
Bass Adjusts low-frequency audio output.
Harmonics Equalizer On: Retrieves the tail shape of the waveform which
would likely be omitted by audio compression
algorithms due to its low amplitude.
Off: Deactivates this function.
A/V SYNC Corrects out-of-sync audio and video signals by
delaying audio output. Audio output can be delayed in
10-millisecond increments, in a range of 0-100 ms.
• Some out-of-sync audio and video cannot be corrected with
this function, depending on the source signal.
Type of
Headphones Switches to the optimal virtual surround-sound setting
for the type of headphones used.
Inner Ear: Ideal for headphones worn in your ears, such
as the supplied headphones.
Overhead: Ideal for headphones worn over or on your
ears.
• Surround-sound effects may not be produced correctly
unless this setting matches the type of headphones used.
Dual Mono
Available only with dual
mono audio source
signals.
Not available for linear
PCM source signals.
Switches the main or sub audio output for audio source
signals other than linear PCM.
Main: Both left and right headphone output consists
solely of the main audio content.
Sub: Both left and right headphone output consists
solely of the sub audio content.
Main/Sub: Headphone output on one side consists of
the main audio content. Output on the other side
consists of the sub audio content.
Note
Note
Note