Using in wired communication – Sony HMZ-T3W User Manual

Page 18

Advertising
background image

18

– When the processor unit or battery unit

is installed in a rack with a door or in a
metal rack

– When the processor unit and the

battery unit are installed in the same
rack

• In the following cases, the condition of

wireless communication is temporarily
degraded owing to a change in the
environment, causing disturbance in
video and audio or affecting operations
of the system.

– If the panel with the SONY logo of the

processor unit or the battery unit is
blocked by a human body or some
object

– If a person, animal, or object (e.g.

curtain, door, or partition) in the room
moves

• If video and audio are disturbed, check

the locations and directions of the
processor unit and battery unit.

• Wireless communication is enabled only

between the processor unit and battery
unit purchased in combination.

• Only two sets of units, including this

system, can be used in the same single
room.

Connect the processor unit and the
battery unit, using an HDMI cable.

*

Use a High-Speed HDMI cable sold
separately.

Using in Wired
Communication

Processor unit (Front)

Battery unit

HDMI cable*

HDMI IN/
MHL

Advertising
This manual is related to the following products: