Sony RM-NX7000 - Manual (Page 17)

Changing the preset of a Component key
You can change the presets (the brands of AV components and the preset codes) programmed for the Component keys.
This operation allow s you to change only preset actions (Preset action or Preset_empty action) programmed for the keys and function buttons assigned to the
component. The contents you edited on the Component display (addition/change/deletion of keys, and addition/deletion of pages) cannot be changed.
Change the preset of the Component key w hen you buy a new AV component, or create new projects, etc.
Note
You cannot change the setting of a component (category of AV components) from the factory-preset code for the Component key.
1. Click the EDIT s w itch in the ce nte r of the w indow to s w itch to the EDIT m ode .
2. Click the page that include s the Com pone nt k e y you w ant to e dit from the Page tre e vie w on the le ft.
The Component keys of the selected page appear on the editor in the center of the w indow .
3. Click the Com pone nt k e y w hos e pre s e t you w ant to change on the e ditor.
4. Click the "Prope rtie s " tab in the uppe r right of the w indow .
5. Click "Change pre s e t" of "Pre s e t" on the right s ide of the w indow .
The "Change preset" dialog box appears, w hich allow s you to change brands (AV component brand) and code sets (preset code.)
o Brands
o Select the new brand name of AV component from the drop-dow n list by clicking .
o Code s e ts
o Select the new preset code from the drop-dow n list by clicking .
Hint
If several preset codes are displayed in "Code sets," you can check the remote control signal of the selected preset code by clicking "Test your
code set." Follow steps 6 to 10 and specify the preset code of your AV component.
How ever, if the display show s only one preset code in "Code sets," or you already know the preset code of your AV component, you do not need
to check the remote control signal. Go to step 11.
6. Conne ct your Re m ote Com m ande r to your PC us ing the USB cable .
If the display show s only one preset code in "Code sets" in step 5, or you already know the preset code of your AV component, you do not need to
check the remote control signal. Go to step 11.
Note s
o Before connecting the Remote Commander to your PC, be sure to connect the supplied AC pow er adaptor to the Remote Commander.
o While checking the remote control signal, do not disconnect the USB cable from your PC. Doing so may cause a malfunction.
o Do not connect several Remote Commanders to your PC at the same time, as you w ill not be able to check the remote control signal.
7. Click "Te s t your code s e t."
The "Test your code set" dialog box appears, w hich allow s you to check the remote control signal of the selected preset code.
8. Follow the ins tructions in the "Te s t your code s e t" dialog box and pre pare the AV com pone nt for w hich the code is to be
program m e d.
9. Aim the Re m ote Com m ande r at the AV com pone nt of w hich the code is to be program m e d, the n click "Se nd IR."
The highlighted action (as appears on a list) is transmitted as the remote control signal. Check if the AV component functions properly.
After the remote control signal is transmitted, the next action on the list w ill be highlighted. By clicking "Send IR," the action is transmitted as the remote
control signal. Check all actions on the list, repeating this operation.
Hint
If you click "Test again," you can recheck the remote control signal from the top of the list.
10. Whe n the che ck of the re m ote control s ignal is com ple te , click "Clos e ."
The "Test your code set" dialog box closes, and the display returns to the "Change preset" dialog box.
Hint
If the AV component does not respond properly to the remote control signal, return to step 5 to reset the preset code, then recheck the signal.
11. Click "OK."
The "Change preset" dialog box closes, and the preset of the Component key (selected in step 3) is changed.
Page 17