Sony RM-NX7000 - Manual (Page 56)

o De le te
Delete the selected action on the Action list by clicking "Delete."
Hint
You can also delete an action by selecting it on the Action list and pressing the Delete key on your keyboard.
o Duplicate
Copy an action programmed for another list element to the Action list.
If you click "Duplicate," the "Duplicate" dialog box appears. Select the list element you w ant to copy from the list in the "Duplicate" dialog box.
Click "OK" to close the "Duplicate" dialog box, and the action of the selected list element is copied to the Action list.
Hint
When you repeatedly program a similar action, such as w hen programming CDs in the CD changer, the Duplicate function makes it easier to program
actions.
o Te s t
Check the operations of an Action list programmed for a list element.
If you click "Test," the "Test IR" dialog box appears, and connection w ith the Remote Commander is confirmed. When the confirmation is complete,
you can click "Test" in the dialog box.
After that, aim the Remote Commander at the AV component of w hich the operation is to be checked, then click "Test." The Action list on the list
element is transmitted as a remote control signal. Check if the AV component functions as you programmed.
Note
Before performing this operation, connect the Remote Commander to your PC w ith the USB cable.
8. Click "OK."
The display returns to the "Edit LIST" dialog box, and the created element is added to the list on the left side.
Page 56