Asus Pentium III IDE RAID Server AP110 - Manual (Page 16)

16 Chapter 1: System Overview
1.3 Rear Panel Features
The AP110 rear panel includes the external I/O ports. The following
picture shows the cable connectors and the devices that you connect
to the ports.
PS/2 Mouse
AC Power
Parallel
RJ-45
PS/2 KB
Serial
USB
VGA
Voltage Selector
The switching power supply that
came with the server has a voltage
selector switch below the power
socket. Use this switch to select the
appropriate voltage according to the
voltage supply in your area.
If the voltage supply in your area is
100-127V, set the switch to 115V.
If the voltage supply in your area is
200-240V, set the switch to 230V.
115V/ 230V
Voltage Selector
Setting the switch to 115V in a 230V environment will
seriously damage the server.
CAUTION