Asus Pentium III IDE RAID Server AP110 - Manual (Page 26)

26 Chapter 3: Hardware Setup
2.5 Install System Memor y
DIMM Sockets
Location
The motherboard has three Dual
Inline Memory Module (DIMM)
sockets that support 3.3V SDRAM
modules in 32, 64, 128, 256, 512MB,
or 1GB densities.
DIMM Sockets
DIMM Notch Socket Break
Install a DIMM
1. Unlock a DIMM socket by
pressing the retaining clips
outward. Align a DIMM on the
socket such that the notches
on the DIMM match the breaks
on the socket.
2. Firmly insert the DIMM into the
socket until the retaining clips
snap back in place and the
DIMM is properly seated.
Installed DIMM
DIMMs are keyed with notches so that they fit in only one
direction. DO NOT force a DIMM into a socket to avoid
damaging the DIMM.
CAUTION