Asus Pentium III IDE RAID Server AP110 - Manual (Page 22)

22 Chapter 2: Hardware Setup
Placement Direction
When installing the motherboard,
make sure that you place it into the
chassis correctly. The edge with the
external ports goes to the rear part
of the chassis.
Motherboard Screws
Place nine (9) screws in the holes
indicated by circles to secure the
motherboard to the chassis. Do not
overtighten the screws. Doing so
may damage the motherboard.
2.3 Motherboard Placement
The motherboard and other internal components of the
AP110 server are already installed as indicated in section
“1.4 Internal Features”. Refer to the motherboard user’s
manual for detailed technical information about the
motherboard.
When removing the motherboard, you need to remove the
hot-swap trays and the CD-ROM drive first, because they
overlap with the motherboard. Refer to Chapter 4 for the
procedure to remove the drives.
NOTE
Rear Panel