Asus Pentium III IDE RAID Server AP110 - Manual (Page 45)

AP110 Server User’s Manual 45
Input Characteristics
A.2 Specifications
Output Characteristics
Over-Voltage Protection (OVP)
Input Voltage Range Min Nom Max
Range 1 90V 115V 135V
Range 2 180V 230V 265V
Input Frequency Range 47 Hz to 63 Hz
Maximum Input ac Current 9A max at 115Vac
5A max. at 230Vac, maximum load
Inrush Current 70A max. at 115Vac,
full load cold start at 25°C
Efficiency 68% min. at nominal input,
maximum load
Output Load Range Regulation Ripple
Voltage Min Max Min Max Max
+5V 1.5A 25.0A -5% +5% 50mV
p-p
+12V 0.2A 8.0A -5% +5% 120mV
p-p
-12V 0A 0.8A -10% +10% 150mV
p-p
-5V 0A 0.5A -5% +5% 100mV
p-p
+5Vsb 0A 2.0A -5% +5% 100mV
p-p
+3V3 0A 14.0A -5% +5% 50mV
p-p
Output Voltage Maximum Voltage
+5V 6.5V
+12V 15.6V
+3.3V 4.3V
NOTE
The power supply will shut down and latch off for shorting
+5V, +12V, -12V, -5V, or +3.3V. By shorting +5Vsb, the power
supply can latch down or automatically recover when the
fault condition is removed.