Sony DCR-VX2100 - Manual (Page 113)

113
Customizing Your Camcorder
Changing the menu settings
Icon/item
CM SEARCH
TAPE TITLE
TITLE DSPL
TITLEERASE
ITEM ERASE
ERASE ALL
REC MODE
AUDIO MODE
Mode
z ON
OFF
z ON
OFF
—
—
—
z SP
LP
z 12BIT
16BIT
Meaning
To search using cassette memory (p. 65, 67,
68, 70).
To search without using cassette memory.
To label a cassette (p. 105).
To display the title you have superimposed.
Not to display the title.
To erase the title you have superimposed
(p. 102).
To erase each item’s data in cassette
memory (p. 107).
To erase all the data in cassette memory
(p. 108).
To record in the SP (Standard Play) mode.
To increase the recording time to 1.5 times
the SP mode.
To record in 12-bit mode (two stereo
sounds).
To record in 16-bit mode (one stereo sound
with high quality).
POWER
switch
VCR
VCR
CAMERA
VCR
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing
back the tape on your camcorder. When you play back the tape on other camcorders
or VCRs, noise may occur in pictures or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master
mini DV cassette so that you can get the most out of your camcorder.
•You cannot make audio dubbing on a tape recorded in the LP mode. Use the SP mode
for the tape to be audio-dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in
the LP mode, the playback picture may be distorted or the time code may not be
written properly between scenes.
Notes on AUDIO MODE
•You cannot dub an audio sound on a tape recorded in the 16-bit mode.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance
in AUDIO MIX.
(continued on the following page)