Sony DCR-VX2100 - Manual (Page 80)

80
Confirming the VCR operation
(1) Insert a recordable tape into the VCR, then set it to recording pause.
(2) Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
If the VCR starts recording, the setting is correct.
When finished, the indicator changes to COMPLETE.
When the VCR does not operate correctly
Set the IR SETUP code, or select the button to cancel the recording pause on the VCR.
2,3
ED I T SET
CONTROL
ADJ TEST
“CUT–I N”
“CUT–OUT”
I R SETUP
PAUSEMODE
I R TEST
RETURN
[MENU] : END
ENGAGE
REC PAUSE
RETURN
EXECUTE
OTHERS
ED I T SET
CONTROL
ADJ TEST
“CUT–I N”
“CUT–OUT”
I R SETUP
PAUSEMODE
I R TEST
RETURN
[MENU] : END
COMPLETE
OTHERS
Dubbing only desired scenes – Digital program editing