Sony DCR-VX2100 - Manual (Page 85)

Editing
85
Dubbing only desired scenes – Digital program editing
(6) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
The CUT-IN point of the first program is set, and the top part of the program mark
changes to light blue.
(7) Search for the end of the first scene you want to insert using the video operating
buttons, then pause playback (p. 30).
(8) Press the SEL/PUSH EXEC dial, or MARK on the Remote Commander.
The CUT-OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(9) Repeat steps 5 to 8, then set the program.
When the program is set, the program mark changes to light blue.
You can set a maximum of 20 programs.
On a blank portion of the tape
You cannot set CUT-IN or CUT-OUT on a blank portion of the tape.
Note
The total time of the programs is indicated on the LCD screen or in the viewfinder, however,
if the time code on the tape is not continuous, the time may not be indicated properly.
7 6
STOP PLAY REW FF PAUSE
MARK
UNDO
ERASE AL L
START
0:08:55:06
1 OUT
TOTAL
SCENE 0:00:00:00
0
V I DEO ED I T
[MENU] : END
8,9
MARK
UNDO
ERASE AL L
START
0:09:07:06
2 I N
TOTAL
SCENE 0:00:12:13
1
V I DEO ED I T
MARK
UNDO
ERASE AL L
START
0:10:01:23
4 I N
TOTAL
SCENE 0:00:47:12
3
V I DEO ED I T
[MENU] : END [MENU] : END