Sony DCR-VX2100 - Manual (Page 79)

Editing
79
Dubbing only desired scenes – Digital program editing
Setting the buttons to cancel the recording pause on the VCR
(1) Turn the SEL/PUSH EXEC dial to select PAUSEMODE, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select the button to cancel recording pause on the
VCR, then press the dial.
The correct button depends on your VCR.
Refer to the operating instructions of your VCR.
The buttons to cancel recording pause on the VCR
The buttons vary depending on your VCR. To cancel recording pause:
• Select PAUSE if the button to cancel recording pause is X.
• Select REC if the button to cancel recording pause is z.
• Select PB if the button to cancel recording pause is B.
Setting your camcorder and the VCR to face each other
Locate the infrared ray emitter of your camcorder and face it towards the remote sensor
of the VCR.
Set the devices about 30 cm (about 11 7/8 in) apart, and remove any obstacles between
the devices.
1,2
ED I T SET
CONTROL
ADJ TEST
“CUT–I N”
“CUT–OUT”
I R SETUP
PAUSEMODE
I R TEST
RETURN
[MENU] : END
PAUSE
REC
PB
OTHERS
ED I T SET
CONTROL
ADJ TEST
“CUT–I N”
“CUT–OUT”
I R SETUP
PAUSEMODE
I R TEST
RETURN
[MENU] : END
PAUSE
OTHERS
Remote sensor