Sony DCR-VX2100 - Manual (Page 121)

121
“Memory Stick” Operations
Recording still images on a “Memory
Stick” – Memory Photo recording
You can record still images on a “Memory Stick.”
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Keep pressing PHOTO lightly until the desired still picture appears. The green
z mark stops flashing, then lights up. The brightness of the picture and focus
are re-adjusted, being targeted for the middle of the picture and are fixed.
Recording does not start yet.
(3) Press PHOTO deeply. The shutter clicks and the image is frozen. The image
displayed on the screen will be recorded on the “Memory Stick.” Recording is
complete when the bar scroll indicator disappears.
[a] The number of images that can be recorded on the “Memory Stick”
[b] The number of recorded images
When the POWER switch is set to MEMORY
The following functions do not work: wide TV mode, digital effect, picture effect, title,
digital zoom, fader, shutter speed (1/30 or smaller) adjustment, and low lux mode and
sports lesson mode in PROGRAM AE. (The indicator flashes in the low lux or sports
lesson mode.)
Note
When you press the PHOTO button lightly at step 2, the focus of the image seems to be
momentarily out.
1 / 6
2
PHOTO
1
3
PHOTO
[a]
[b]
MEMORY
CAMERA
VCR
OFF (CHG)
POWER
SFN SFN