Sony MZ-B10 - Manual (Page 25)

25
4
Press . or > until “MARK
ON” appears in the display, and then
press MENU/ENTER.
“10min.ON” appears in the display
and the selection is entered.
“T” appears after the track number in
the display.
To cancel Auto Time Mark
Select “MARK OFF” in step 4 or stop
recording.
Using Auto Time Mark to add
track marks while recording
When the elapsed recording time
exceeds 10 minutes:
The recorder adds a track mark at the
point when Auto Time Mark is set, and at
each 10-minute interval thereafter.
Example: When 12 minutes of recording
has been completed when the Auto Time
Mark is set.
A track mark will be added at the 12-
minute point (following the start of
recording) and after each 10-minute
interval thereafter.
When the time interval for Auto Time
Mark (10 minutes) exceeds the
elapsed recording time:
The recorder adds a track mark when 10
minutes has elapsed.
Example: When 3 minutes of recording
has been completed when the Auto Time
Mark is set.
A track mark will be added at the 10-
minute point (following the start of
recording) and after each 10-minute
interval thereafter.
Note
The setting will be lost when the recording
stopped.