Sony MZ-B10 - Manual (Page 40)

40
Starting an operation quickly
(Quick Mode)
Playback starts quickly after pushing the
playback button or cueing to a track, or an
internal recorder operation starts quickly
(such as writting data after stopping a
recording operation).
1
Enter the menu and select “OPTION”
- “PowerMode”.
2
Select “QUICK”.
To switch back to the normal
setting
Select “NORMAL”.
Notes
• When the power mode is set to “QUICK”, the
power remains on within the recorder even
when nothing appears in the display. This
leads to a shorter battery life. The shortened
battery life for each recording mode is as
follows:
• If no recorder operation (including opening or
closing of the lid) occurs for one hour, the
recorder turns off. For this reason, the next
time you start playback or do another
operation, the recorder will not respond
quickly. The unit, however, will return to
quick mode afterwards.
Using an optional foot control
unit
If you use the optional foot control unit
(FS-85B50), you can use your foot to
pause or restart recording or start or pause
playback. If you use the foot control unit,
set the recorder for foot control use.
1
Enter the menu and select “OPTION”
- “FOOT SW”.
2
Select “SW ON”.
Notes
• The recorder is factory set to “SW ON”.
• If you connect an optional remote control with
a display window, the “FOOT SW” setting
will automatically change to “SW OFF”. If
you attach the foot control unit afterwards,
you must change the setting from “FOOT
SW” back to “SW ON”.
Recording
mode Approx. battery life
(when recording)
SP 15 hours
LP2 17 hours
LP4 18 hours
Monaural 17 hours
. • REVIEW •
AMS, > • CUE
• AMS
MENU/
ENTER . • REVIEW •
AMS, > • CUE
• AMS
MENU/
ENTER