Sony MZ-B10 - Manual (Page 54)

54
NO COPY • You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
, Use analog connection instead (page 22).
NO DISC • You tried to play or record with no disc in the recorder.
, Insert an MD.
NO EDIT • You tried to erase a group with a disc without group setting.
, You cannot erase groups with a disc with no groups.
• You selected “ : Set”, “ : Release”, or “Move” while
recording.
• You tried to erase a track, disc, or group while recording.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tried to overwrite a track marks.
NO SET • You tried to make the following settings while recording.
— Recording mode
— Selection of “
: REC” in menu
— Play mode while “End” appears in the display
NoOPERATE • You tried to make the Auto Time Mark setting while recording
through digital connection.
• You tried to press X • PAUSE or TRACK MARK during synchro-
recording.
NO SIGNAL • The recorder could not detect digital input signals.
, Make sure that the source is connected firmly (page 21).
P/B ONLY • You tried to record or edit on a premastered MD (P/B stands for
“playback”).
, Insert a recordable MD.
PROTECTED • You tried to record or edit on a MD with the tab in the record-
protect position (page 46).
, Slide the tab back.
READ ERR • The recorder cannot read the disc information correctly.
, Reinsert the disc.
REC ERR • Recording was not correctly done.
, Place the recorder at a place with no vibrations and record
again.
• The disc is soiled with an oil film or finger prints, is scratched, or is
not a standard disc.
, Try recording again with another disc.
Error message Meaning/Remedy