Sony MXD-D40 - Manual (Page 10)

Basic Operations
10
Recording a CD to an MD at
High Speed
(High-Speed CD-MD Synchro-Recording)
1 Press 1/u.
The STANDBY indicator turns off.
2 Insert a recordable MD.
3 Press § OPEN/CLOSE to insert a CD. Press the button again
to close the CD tray.
4 Press PLAY MODE to select the playing mode of the CD
(normal play or Program Play).
5 Press CD SYNCHRO HIGH.
“CD SYNCHRO” appears and “–High–” flashes in the display.
The MD deck section stands by for recording and the CD
player section stands by for playing.
6 After “CD SYNCHRO” and “–High–” turn off, press · or P
on the right of the front panel.
High-speed recording starts. The MD deck section and the CD
player section will automatically stop after recording.
To stop recording
Press p on the right of the front panel.
1/u
§ §
0 ) ≠ ± ≠ ± r
p P ·
0 )
p P ·
PHONE LEVEL
PHONES
MIN MAX
MENU/ NO YES
CLEAR
PUSH ENTER
REC
AMS
EJECT OPEN/CLOSE
NORMAL
CD SYNCHRO
HIGH
CLEAR
TIME PLAY MODE DISPLAY INPUT PLAY MODE TIME/CHAR
PUSH ENTER CD
AMS REC-IT
STANDBY
MD
MD LP
REC MODE
1 2 5 3
4 6
You can easily make digital
recordings from a CD to an MD
faster than normal CD-MD
Synchro-Recording, marking
track numbers in the same
sequence as the original CD.
Before recording, see “Notes on
Recording” on page 19.
z
CD text is copied to the MD
automatically
When the CD to be recorded
using the High-Speed CD-MD
Synchro-Recording Function
contains track names, this
information is recorded onto
the MD automatically.
Note that CD text on some
CDs is copy-protected and
thus may not be copied to the
MD.
z
You can play back tracks just
recorded
If “TRACK” lights up in the
display when recording has
finished, press ·
immediately to play back from
the first track of the material
just recorded.