Sony MXD-D40 - Manual (Page 7)

Basic Operations
Basic Operations
7
Playing an MD
1/u
§ §
0 ) ≠ ± ≠ ± r
p P ·
0 )
p P ·
PHONE LEVEL
PHONES
MIN MAX
MENU/ NO YES
CLEAR
PUSH ENTER
REC
AMS
EJECT OPEN/CLOSE
NORMAL
CD SYNCHRO
HIGH
CLEAR
TIME PLAY MODE DISPLAY INPUT PLAY MODE TIME/CHAR
PUSH ENTER CD
AMS REC-IT
STANDBY
MD
MD LP
REC MODE
2 3 4
1 Turn on the amplifier and set the source selector to the position
for this deck.
2 Press 1/u.
The STANDBY indicator turns off.
3 Insert an MD.
With the arrow pointing this way
4 Press ·.
The deck starts playing. Adjust the volume on the amplifier.
To Do the following:
Connect the headphones.
Adjust the headphone volume.
With the label side up
Press p.
Turn AMS counterclockwise (or press = on the
remote).
Take out the MD
When using the controls on the
deck
Use the MD deck controls located
to the right of the front panel.
When using the remote Z
Set SELECT to MD.
Audio output
Output switches automatically to
the audio of the MD.
z
You can start playing with
the track selected in step 4
1 Turn AMS (or press = or
+) to select the track you
want to play using the
display*.
2 Press AMS or ·.
* See “Using the Display” on
page 12 and 13.
z
You can change the MD
playback speed
See “Changing the Pitch of the
MD” on page 18.
Stop playing
Pause playing Press P. Press the button again or press · to
resume playing.
Go to the next track Turn AMS clockwise (or press + on the
remote).
Go to the beginning of the
current track or the
preceding track
Press § EJECT after stopping playing.