Sony MXD-D40 - Manual (Page 34)

Editing Recorded MDs
34
5
Press AMS or YES.
A flashing cursor appears in the display.
The deck starts playing and you can name a track
while monitoring the sound.
6 Press TIME/CHAR to select the character type as
follows:
To select Press TIME/CHAR repeatedly until
Uppercase letters “A” appears in the display
Lowercase letters “a” appears in the display
Numbers “0” appears in the display
Symbols “ ’ ” appears in the display
7
Turn AMS to select the character.
The selected character flashes.
Letters, numbers, symbols, and a space appear in
sequential order as you turn AMS.
You can use the following symbols in titles:
’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ `
You can press TIME/CHAR to change the
character type at any time during step 7 (see step 6
above).
8
Press AMS to enter the selected character.
The selected character stops flashing and the
cursor flashes waiting for the input of the next
character.
9
Repeat steps 7 and 8 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing, and repeat steps 7 and 8 to enter the
correct character.
To erase a character
Press 0 or ) until the character to be erased
starts flashing, then press CLEAR.
To enter a space*
Press AMS while the cursor is flashing. To enter a
space after the title, press AMS or
).
* You cannot select a space for the first character of the
title.
10
Press YES.
To cancel labeling
Press MENU/NO or p.
Notes
• You cannot label an MD during recording.
• You cannot label a track or an MD while you are recording
over an existing track.