Sony MXD-D40 - Manual (Page 33)

33
Editing Recorded MDs
5
Press AMS or YES.
“Complete!” appears for a few seconds and the
moved track begins playing back.
To cancel the Move Function
Press MENU/NO or p.
z
You can undo the Move Function
Use the Undo Function immediately after you moved
the track (see page 37).
Labeling Recordings
(Name Function)
You can create titles for your recorded MDs and tracks.
Titles — which may consist of uppercase and
lowercase letters, numbers and symbols for a
maximum of about 1,700 characters per disc — appear
in the display during MD operation. You can also use
the remote to label a track or an MD (see “Labeling
tracks and MDs with the remote” on page 35).
AMS
MENU/NO YES 0/)
TIME/CHAR CLEAR
Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing,
recording, or stopped. If the track is recording, be
sure to finish labeling before the track ends. If the
track ends before you’ve completed the labeling
procedure, the characters already entered are not
recorded and the track will remain unlabeled.
1
Press MENU/NO to display “Edit Menu.”
2
Turn AMS until “Name ?” appears in the display
and press AMS or YES.
Skip this step while recording.
3
Turn AMS until “Nm In ?” appears in the display,
then press AMS or YES.
4
Turn AMS to select “Disc” to label an MD, or to
specify the track to label.
While recording, go to step 6.
(Continued)