Airlink X EV-DO - Manual (Page 118)

Raven X EV-DO for Verizon - User Guide, version 2.34 112
PPPoE: Point to Point Protocol over Ethernet
Configuring your router for PPPoE with the Raven X
If your network router has PPPoE discovery, the Raven X will be discovered on the intranet through
PPPoE discovery process, which uses broadcast Ethernet packets. Once found, the Raven X can be
designated as the primary or failover connection.
Your network router should be configured to make a PPPoE connection using the username and
password configured with *HOSTUID and *HOSTPW, and the service name configured with
*MODEMNAME (optional). It should also be configured to re-route packets through the connec-
tion with the
Raven X .