Airlink X EV-DO - Manual (Page 52)

Raven X EV-DO for Verizon - User Guide, version 2.34 46
Specifications for the Raven X EV-DO
Environmental:
• Certifications: Class 1 Div 2, parts A, B, C, & D
Power Management:
• Low power consumption
• Dormant connection (idle for 10-20 seconds): 104 mA at 12 VDC
• Input Voltage: 9 VDC to 28 VDC
• Input Current: 20 mA to 350 mA
Power consumption
Modem
Raven X 85/104 mAh 239-270 mAh 239-270 mAh
Serial Port Pinouts
The cable between the Raven X and a computer or other serial device needs to be wired straight-
through (pin 1 goes to pin 1, pin 2 to pin 2, etc.). If your end device connected to the Raven X is a
DCE device, you will need a null-modem cable.
FIGURE 1. : Female DB-9 DCE
5
4
3
2
1
9
8
7
6
< - > GND (Ground)
< - DTR Data Terminal Ready)
< - Rx (Receive)
- > Tx (Transmit)
- > DCD (Data Carrier Detect)
Unused
CTS (Clear to Send) < -
RTS (Request to Send) - >
DSR (Data to Send) < -