Airlink X EV-DO - Manual (Page 53)

Raven X EV-DO for Verizon - User Guide, version 2.34 47
APPENDIX C
AT Commands
Using Wireless Ace
With Wireless Ace, you only need to find the command listed and then enter the new value in the
space provided. For those commands which have specific parameters, the choices will be in a drop
down menu.
FIGURE 1. Wireless Ace: Entering new configuration values
To set or commit the changes in the modem, use the Write button at the top of Wireless Ace inter-
face.
FIGURE 2. Wireless Ace: Tool bar
For more information on using Wireless Ace, please refer to the Wireless Ace User Guide.
With Wireless Ace, you can create a template from one modem and then use that
template to configure other modems in the exact same way. You can use the tem-
plate in AceNet, too, to configure several modems at the same time with the same
parameters.