Sony DCR-PC101 - Manual (Page 118)

118
Selecting still image quality mode
You can select the image quality mode in still image recording. The default setting is
SUPER FINE.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the right (unlock) position.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET in
, then press EXEC (p. 188).
(4) Press r/R to select QUALITY, then press EXEC.
(5) Press r/R to select a desired image quality, then press EXEC.
To return to FN
Press EXIT.
Using a “Memory Stick” – Introduction
Image quality settings
Setting Meaning
SUPER FINE (SFN) This is the highest image quality in your camcorder.
The number of still images you can record is less than in
FINE mode. Super fine images are compressed to about
1/3.
FINE (FINE) Use this mode when you want to record high quality
images. Fine images are compressed to about 1/6.
STANDARD (STD) This is the standard image quality. Standard images
compressed to about 1/10.
Note
In some cases, changing the image quality mode may not affect the image quality,
depending on the type of images you are shooting.
1 2
FN
3
MEMORY SET
STILL SET
MOVIE SET
PHOTO SAVE
FILE NO.
DELETE ALL
FORMAT
EXIT
RET. EXEC
4
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
EXIT
RET. EXEC
SUPER FINE
FINE
STANDARD
REMAIN
12
POWER
MEMORY
VCR
CAMERA
OFF
(CHARGE)
LOCK