Sony DCR-PC101 - Manual (Page 152)

152
Viewing a moving picture – MPEG movie playback
Playback picture from desired part
The moving picture recorded on the “Memory Stick” is divided into 23 parts.
You can select every each one point and playback pictures.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY.
Make sure that the LOCK switch is set to the right (unlock) position.
(2) Press PLAY.
The last recorded image is displayed.
(3) Press +/– to select the desired moving pictures.
To see the previous picture, press –.
To see the next picture, press +.
(4) Press </, to select the point where you want to play back.
< : to see previous part
, : to see next part
(5) Press MPEG N X to start playback.
(6) Adjust the volume following the steps below.
1 Press FN and select PAGE3.
2 Press VOL. The screen to adjust volume appears.
3 Press –/+ to adjust the volume.
– : to decrease the volume.
+ : to increase the volume.
4 Press OK.
To stop MPEG movie playback
Press MPEG N X.
When recording time is too short
The moving picture may not be divided into 23 parts.