Sony DCR-PC101 - Manual (Page 81)

81
Advanced Playback Operations
Searching for a photo – PHOTO SEARCH/PHOTO SCAN
Searching for a photo without using cassette memory
(1) Set the POWER switch to VCR.
(2) Press FN to display PAGE1.
(3) Press MENU, then set CM SEARCH to OFF in
(p. 190).
(4) Press SEARCH MODE on the Remote Commander repeatedly, until the
PHOTO SEARCH indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH
(no indicator) T PHOTO SCAN
(5) Press . or > on the Remote Commander to select the photo for playback.
Each time you press . or >, your camcorder searches for the previous or
next photo.
Your camcorder automatically starts playback of the photo.
To stop searching
Press x on the Remote Commander or on your camcorder.
Scanning photo
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the
PHOTO SCAN indicator appears.
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH
(no indicator) T PHOTO SCAN
(3) Press . or > on the Remote Commander.
Each photo is played back for about five seconds automatically.
To stop scanning
Press x on the Remote Commander or on your camcorder.
3
2
PHOTO 00
SCAN
SEARCH
MODE