Sony DCR-PC101 - Manual (Page 70)

70
4
ON
EXPO–
SURE OK
EXPO–
SURE OK
ON FADER
Pull out the viewfinder until it clicks, and then turn the LCD panel over and move it
back to your camcorder body with the LCD screen facing out. You can operate with the
touch panel using the viewfinder.
Use the viewfinder in the following case:
When operating camera brightness and the fader (only in CAMERA) on the touch panel
using the viewfinder.
(1) Set the POWER switch to CAMERA or MEMORY. Pull out the viewfinder
until it clicks, and then turn the LCD panel over and move it back to your
camcorder body with the LCD screen facing out.
(2) Press OFF. The message PANEL OFF appears on the screen.
(3) Press OK. The LCD screen is turned off.
(4) Using the viewfinder, press the LCD screen. EXPOSURE,
OK, ON and
FADER (only in CAMERA) appear.
(5) Select a desired item, then press OK.
EXPOSURE: adjust the exposure by pressing –/+.
FADER:
press FADER until the desired fader mode is displayed.
The indicator changes as follows:
FADER t M. FADER t BOUNCE t MONOTONE
(no indicator) T DOT T WIPE T OVERLAP
ON: The LCD screen lights up, then becomes Mirror Mode.
To make the buttons on the LCD screen disappear
Press OK.
Using the viewfinder
In CAMERA
In MEMORY
Viewfinder