Sony DCR-PC101 - Manual (Page 125)

125
“
Memory Stick
”
Operations
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the right (unlock) position.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET in
, then press EXEC (p. 188).
(4) Press r/R to select BURST, then press EXEC.
(5) Press r/R to select a desired setting, then press EXEC.
(6) Press EXIT to make the menu settings disappear.
(7) Press PHOTO deeper.
If the “Memory Stick” becomes full
“ FULL” appears on the screen, and you cannot record still images on this “Memory
Stick.”
The number of still images in continuous shooting
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the “Memory Stick.”
During continuous recording of images
The flash (optional) does not work.
When shooting with the self-timer or the Remote Commander
Your camcorder automatically records up to the maximum number of still images.
If remaining capacity on the "Memory Stick" is less than for three images
EXP BRKTG does not work. "
FULL" is displayed when you press PHOTO.
The effect of EXP BRKTG
The effect of EXP BRKTG may not be noticeable on the LCD screen.
We recommend viewing images on TV or the computer to recognize the effect.
When selecting NORMAL
Recording continues up to the maximum number of still images during pressing
PHOTO deeper. Release PHOTO to stop recording.
Recording still images on “Memory Stick”s
– Memory photo recording
B
5
2
FN
MEMOR Y S E T
T E S L L I T S
T S R U
EXIT
RET. EXEC
QUALITY
IMAGESIZE
R r
O F F
N O R M A L
E X P B R K T G
M U L T I S C R N