Sony DVP-NS900V - Manual (Page 25)

Hook
ups
25
If your AV amplifier (receiver) has 5.1 channel inputs, use .
If you want to use the Dolby Digital or DTS decoder function on your AV amplifier (receiver),
connect to its digital jack using
. With the following connections, you can enjoy a more
realistic audio presence in the comfort of your own home.
: Connecting to the 5.1ch input jacks
You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or SACD multi
decoder of this player. You can also enjoy Dolby Surround (Pro Logic) sounds, or surround
sounds using various “SURROUND” modes (page 60).
x Recommended surround sound effects for this connection
When 6 speakers are connected. (Set “SURROUND” to “OFF.”)
•
Dolby Digital (5.1ch) (page 97)
•
DTS (5.1ch) (page 97)
•
SACD Multi channel (page 97)
: Connecting to a digital jack
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the surround sound effects of the player.
x Recommended surround sound effects using this connection with your
amplifier (receiver)
•
Dolby Digital (5.1ch) (page 97)
•
DTS (5.1ch) (page 97)
•
96kHz/24bit PCM
z When using connection , refer to the operating instructions of the receiver (amplifier) for correct speaker
setting location.
Notes
•
After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” (page 31)
and “DTS” to “DTS” (page 31). Otherwise, no sound or a loud noise will come from the speakers.
•
When you connect an amplifier (receiver) that conforms to the 96kHz sampling frequency, set “48kHz/96kHz
PCM” to “96kHz/24bit” (page 89).
•
SACD audio signals are not output from the digital jack.
Connecting to an AV amplifier (having 5.1ch input jacks or a digital input
jack) and 4 to 6 speakers
B
B-1
B-2
B-1
B-2
B-2
continued