Sony DVP-NS900V - Manual (Page 78)

78
Controlling Your TV or AV
Amplifier (Receiver) with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player with an AV
amplifier (receiver), you can control the
volume with the supplied remote.
Notes
•
Depending on the units being connected, you may
not be able to control your TV or AV amplifier
(receiver) using some of the buttons below.
•
If you enter a new code number, the code number
previously entered will be erased.
•
When you replace the batteries of the remote, the
code number you have set may be reset to the default
setting. Set the appropriate code number again.
1
Slide the TV/DVD switch to TV.
2
While holding down [/1, press down on
the scroll key.
“TV P-1” appears in the LCD screen.
3
Release [/1.
4
Toggle the scroll key up or down to
select your TV’s manufacturer’s code
(see the table below).
5
Press down on the scroll key.
The manufacturer’s code flashes and the
remote is set.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Controlling TVs with the remote
[ /1
VOL +/–
TV/VIDEO
Number
buttons
TV/DVD
switch
CH +/–
WIDE MODE
ENTER
LCD screen
Scroll key
Manufacturer Code
number
Sony (default) 1
Akai 4
AOC 4
Centurion 12
Coronado 3
Curtis-Mathes 12
Daytron 12
Emerson 3,4,14
Fisher 11
General Electric 6,10
Gold Star 3,4,17
Hitachi 2,3
J.C.Penney 4,12
JVC 9
KMC 3
Magnavox 3,8,12
Marantz 4,13
MGA/
Mitsubishi 4,12,13,
17
NEC 4,12
Panasonic 6,19
Philco 3,4
Philips 8,21
Pioneer 16
Portland 3
Quasar 6,18
Radio Shack 5,14
RCA 4,10
Sampo 12
Samsung 20
Sanyo 11
Scott 12
Sears 7,10,11
Sharp 3,5,18
Sylvania 8,12
Teknika 3,8,14
Toshiba 7
Wards 3,4,12
Yorx 12
Zenith 15
Manufacturer Code
number