Sony DVP-NS900V - Manual (Page 35)

Hook
ups
35
ql Press ENTER.
The Setup Display for selecting whether or not you have connected a subwoofer appears.
w; Press X/x to select the item.
wa Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select “QUICK” under “SETUP” in the Control Menu (page 80).
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 25 to 29
(
through ). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 80 for using the Setup Display.
Audio Connection (pages 25 to 29)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 88).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to 96 kHz digital audio input (page 89).
Enjoying the surround sound effects
Item You select Page
DISTANCE
BALANCE
LEVEL Set according to the connected
speakers 91
Item You select Page
DOWNMIX DOLBY SURROUND 88
DIGITAL OUT ON 88
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF TEST TONE:
FRONT:
CENTER:
LARGE
LARGE
REAR:
SUBWOOFER:
To set, press , then .
To quit press ENTER
SETUP DISPLAY
NONE
NONE
YES
LARGE(REAR)
B D
A
B-1
B-2 C-2 D-2
continued