Sony STR-DA4600ES - Manual (Page 128)

128 GB
1
Press ?/1 to turn off the
receiver.
2
While holding down MUSIC and
SPEAKERS (A/B/A+B/OFF),
press ?/1 to turn on the
receiver.
You can check the version of the software on
the system of the receiver, and you can also
update the software of the receiver.
You can also update the software of the
receiver using the Setup Manager application
software provided on the CD-ROM supplied
with the receiver. For details, see “Updating
the receiver software using the Setup
Manager” (page 89).
To update the receiver using the
menu
1 Select “Software Version,” then press
.
The current software version is displayed
on the TV screen.
2 Select “Update via Internet,” then press
.
The current software version and latest
software version are displayed on the TV
screen.
3 Press to select “Update.”
A confirmation screen appears on the TV
screen.
4 Select “Start,” then press .
Receiver updating starts.
The MULTI CHANNEL DECODING
lamp on the front panel flashes while
updating.
When the updating complete, the receiver
will restart automatically.
Notes
• In the following cases, a message appears on the
TV screen and the update of the receiver is not
performed.
– When all versions are the latest one.
– When the receiver cannot retrieve the data, such
as when the network has not been set up, or
when the server is down, etc.
• Do not turn the receiver off or disconnect the
network cable during software updating. It may
cause a malfunction.
• It may take 50 minutes for the software updating to
complete.
Software Version
?/1
SPEAKERS (A/B/A+B/OFF)
MUSIC