Sony STR-DA4600ES - Manual (Page 135)

135 GB
Adju
stin
g Setti
ngs
To change the display
You can check the sound field, etc., by
changing the information on the display.
1 Select the input for which you want to
check the information.
2 Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected
t Sound field type t
Volume level t Stream information* t
Input name you entered ...
* Stream information may not be displayed.
When listening to FM and AM radio
Station name
t Frequency t Sound field
type t Volume level ...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When tuning in a channel from a SIRIUS
Channel name
t Channel number t
Category t Artist name t Song title t
Composer name t Signal strength t
Sound field type t Volume level ...
Video settings
<VIDEO> RESOLUTION DIRECT, AUTO, 480/576i, 480/576p,
720p, 1080i, 1080p AUTO
ZONE RESO.
(Zone2 resolution) 480/576i, 480/576p, 720p, 1080i 480/576i
V. ASSIGN
(Video input assignment) For reference on this function, see
“Enjoying the sound/images from other
inputs (Input Assign)” (page 102).
HDMI settings
<HDMI> CTRL: HDMI
(Control for HDMI) CTRL ON, CTRL OFF CTRL OFF
PASS THRU
(Pass Through) ON, OFF OFF
AUDIO OUT AMP, TV+AMP AMP
SW LEVEL
(Subwoofer level for HDMI) SW AUTO, SW +10 dB, SW 0 dB SW AUTO
SW LPF
(Subwoofer LPF for HDMI) LPF ON, LPF OFF LPF ON
V. DIRECT
(Video direct) DIRECT ON, DIRECT OFF DIRECT
OFF
System settings
<SYSTEM> DIMMER 0%DOWN, 60%DOWN,
100%DOWN 0%DOWN
NAME IN
(Naming inputs) For reference on this function,
see“Naming the input (Name Input)”
(page 58).
RS232C ON, OFF OFF
AUTO STBY ON, OFF ON
VER x.xxx
UPDATE(PC) PERMIT, DENY DENY
Menu Item Parameter Initial
setting