Asus TW510-E2 - Manual (Page 133)

A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 A S U S T W 5 1 0 - E 2 6 - 7 6 - 7 6 - 7 6 - 7 6 - 7
Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror) Creating a RAID 1 set (Mirror)
To create a RAID 1 set:
1. From the D e f i n e a N e w A r r a y D e f i n e a N e w A r r a y D e f i n e a N e w A r r a y D e f i n e a N e w A r r a y D e f i n e a N e w A r r a y menu, select R A I D M o d e R A I D M o d e R A I D M o d e R A I D M o d e R A I D M o d e, then
press <Enter>. A pop-up menu appears.
2. Use the up or down arrow keys to select
M i r r o r i n g
M i r r o r i n g M i r r o r i n g M i r r o r i n g M i r r o r i n g, then press <Enter>.
Mirroring
Striping
Stripe Mirroring
Spanning
5. Press <TAB> to move to the F r e e D i s k s F r e e D i s k s F r e e D i s k s F r e e D i s k s F r e e D i s k s section.
6. Highlight the hard disk drives that you want to add in the RAID set,
then press the right arrow key to select. The selected hard disk drives
appear in the A r r a y D i s k s
A r r a y D i s k s A r r a y D i s k s A r r a y D i s k s A r r a y D i s k s section. Repeat the process until all
desired hard disk drives are added.
Clear disk data?
[Y] YES [N] Cancel
7. After selecting the hard disk drives, press
<F7> to create the RAID 1 set. A pop-up
window appears.
8. Press <Y> to delete all data from the hard disk drives and continue
creating the RAID set. Press <N> to backup exisitng data to a target
hard disk drive.
You will lose all data on the drives if you clear the disk data!
9. The utility displays the created RAID 1 set. Press <Ctrl+X> to save
your settings and exit the utility.0
[F6] Back [F7] Finish [TAB] Navigate [ ↑↓] Select [ENTER] Popup
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode: Mirroring Striping Block: Optimal
Free Disks Array Disks
Loc Disk Model Name Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX 1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX [ →] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[ ←] Del