Asus TW510-E2 - Manual (Page 134)

6 - 8 6 - 8 6 - 8 6 - 8 6 - 8 C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n C h a p t e r 6 : D r i v e r i n s t a l l a t i o n
Rebuilding a RAID set Rebuilding a RAID set Rebuilding a RAID set Rebuilding a RAID set Rebuilding a RAID set
To rebuild a RAID set:
1.
From the A r r a y L i s t A r r a y L i s t A r r a y L i s t A r r a y L i s t A r r a y L i s t, use the up or down arrow keys to select the
RAID set you want to rebuild, then press <Enter>. The RAID set details
appear.
2. Press <R>.
3. Use the up or down arrow keys to select a the RAID set you want to
rebuild, then press <F7>. A confirmation message appears.
4. Press <Enter> to start rebuilding the array, or
<Esc> to cancel. The A r r a y L i s t
A r r a y L i s t A r r a y L i s t A r r a y L i s t A r r a y L i s t screen
displays the RAID set after rebuilding.
Rebuild array?
[Enter] OK [Esc] Cancel
[Ctrl-X]Exit [ ↑↓ ↑↓ ↑↓ ↑↓ ↑↓]Select [B]Set Boot [N]New Array [ENTER]Detail
NVIDIA RAID Utility Oct 5 2004
- Array List -
Boot Id Status Vendor Array Model Name
No 4 Healthy NVIDIA STRIPING XXX.XXG
No 3 Healthy NVIDIA MIRRORING XXX.XXG
[ ↑↓] Select [F6] Back [F7] Finish
Array 1 : NVIDIA MIRROR XXX.XXG
- Array Detail -
RAID Mode: Striping
Striping Width: 1 Striping Block: 64K
Adapt Channel M/S Index Disk Model Name Capacity
2 1 Master 0 XXXXXXXXXXXXXXXXX XXX.XXGB
1 0 Master 1 XXXXXXXXXXXXXXXXX XXX.XXGB