Sony HT-CT500 - Manual (Page 26)

26 US
To extend the speaker cord
Substitute the speaker cord (supplied) with another speaker cord (not supplied) that has the desired
length.
With the catch facing down, press and hold the connector down against a flat surface (1) and remove
the speaker cords from the connector (2).
If you reconnect the speaker cord (supplied) to the connector, be sure to match the speaker cord to the
appropriate speaker terminals: 3 to +, and # to –. Connect the cord which a color tube is attached on
one side to +. If the cords are reversed, the sound will lack bass and may be distorted.
Catch
1
2
Color tube