Sony HT-CT500 - Manual (Page 60)

60 US
By connecting Sony components compatible
with “BRAVIA” Sync using an HDMI cable (not
supplied), operation is simplified as below:
• One-Touch Play: When you play back a
component such as a Blu-ray Disc/DVD player
(recorder), the system and the TV are turned on
automatically and switch to the appropriate
HDMI input.
• System Audio Control: While watching TV,
you can select to output the sound from the TV
speaker or the speakers of the system.
• System Power Off: When you turn off the TV,
the system and the connected components are
also turned off simultaneously.
“BRAVIA” Sync is compatible with a Sony TV,
Blu-ray Disc/DVD player, AV amplifier, etc.,
with the Control for HDMI function.
Control for HDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will
not operate in the following
cases:
• When you connect this system to a component
that does not correspond with the Control for
HDMI function.
• When you connect the system and components
using other than HDMI connection.
Sony recommends that you connect this system
to products featuring “BRAVIA” Sync.
• Depending on the connected component, the Control
for HDMI function may not work. For details, refer to
the operating instructions of the component.
To use the “BRAVIA” Sync, set the Control for
HDMI function to on for the system and the
connected component.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the system and the connected
component can be set simultaneously by setting
the Control for HDMI function of the TV.
1
Make sure that the system is connected
to the TV and the connected
components (which should be
compatible with the Control for HDMI
function) using HDMI cables (not
supplied).
2
Turn on the system, the TV, and the
connected components.
3
Select the input of the system
connected to the component you want
to watch (BD, DVD, SAT/CATV), and
switch the HDMI input of the TV, so that
an image from the connected
component is displayed.
“BRAVIA” Sync features
What is “BRAVIA” Sync?
Note
Preparing for the
“BRAVIA” Sync
MENU
TV
AV
TV INPUT
BD
VIDEO1
YELLOW BLUE RED GREEN
VIDEO2 VIDEO3
TUNER/
BAND
ENT
/CLEAR
GUI MENU
TOOLS/
OPTIONS
RETURN/
EXIT
HOME
DISPLAY
DVD SAT/CATV DMPORT
SYSTEM STANDBY
?/1
Input
buttons
C, X, x, c,
GUI
MENU