Sony HT-CT500 - Manual (Page 28)

28 US
Connecting a Blu-ray Disc player (recorder), “PlayStation 3”,
DVD player (recorder), satellite tuner, cable television tuner,
etc.
Notes on HDMI connections
• Use a High Speed HDMI cable. If you use a Standard HDMI cable, 1080p or Deep Color images may
not be displayed properly.
• Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable.
• Check the setup of the connected component if an image is poor, or sound does not come out of a
component connected via the HDMI cable.
• Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be
suppressed by the connected component.
• Sound may be interrupted when the number of channels or sampling frequency of audio output
signals from the playback component is changed.
• When the connected component is not compatible with copyright protection technology (HDCP), the
image and/or the sound from the HDMI TV OUT jack may be distorted or may be not output.
In this case, check the specification of the connected component.
• Sony does not recommend using an HDMI-DVI conversion cable.
• When TV or tuner input is selected, the video signal that was selected last time is output.
EZW-T100 ANTENNA
HDMI
SPEAKER
TV OUT SAT/CATV IN DVD IN
CENTER
ONLY FOR SS-CT500
ASSIGNABLE
AUDIO IN
L
R
AUDIO IN
VIDEO IN COMPONENT VIDEO IN
R
L
Y
R
L
BD IN
AM FM
75 COAXIAL
DMPORT TV
REMOTE
CTRL VIDEO 1
DC 5V
0.7A MAX ONLY FOR
SS-CT500
VIDEO 2 VIDEO 3
P B /
C B
P R /
C R
OPTICAL
TV IN
COAXIAL
VIDEO 2 IN VIDEO 3 IN VIDEO 3 IN
DIGITAL
Blu-ray Disc player (recorder),
“PlayStation 3”
Audio/video signal
Satellite tuner, cable television
tuner
Audio/video signal
A
Audio/video signal
DVD player (recorder)
A A
Rear of the
subwoofer
A HDMI cable (not supplied)
: Signal flow