Sony SAT-T60 - Manual (Page 17)

17
Co
nnec
ting Y
o
u
r
Eq
uipm
ent
Connecting Your Equipment
Cables You Can Use
Below is a description of the cables you can use to make connections. Not all
cables are supplied with your Satellite Receiver (see page 7).
Coaxial (RF) Cable with F-type connectors (not supplied) for VHF/UHF jacks
Use the VHF/UHF IN jack to receive signals from a TV antenna or from a cable TV
connection. You can also use the VHF/UHF (SAT) OUT jack to send audio and video
signals to your TV or VCR.
RG-6 Coaxial Cable with F-type connectors for SATELLITE IN jacks
Use the SATELLITE IN jacks to receive signals from DIRECTV Satellites through your
Satellite Dish Antenna.
Audio/Video Cables with RCA-type plugs for Audio/Video (A/V) jacks
Use the audio/video jacks to send good quality analog video and stereo audio signals.
S-Video Cables with S-Video plugs for S-VIDEO jacks
Use the S-VIDEO jack to send excellent quality analog video signals.
Optical Cable with Optical plug (not supplied) for DIGITAL AUDIO
(OPTICAL) jack
Use the DIGITAL AUDIO OUT (OPTICAL) jack to send excellent quality audio signals
to a Dolby Digital receiver.
RJ-11 Phone Cord for TEL LINE jack
Use the TEL LINE jack to connect to a telephone outlet. Periodically, information on
your DIRECT TICKET
®
, Pay Per View selections, and TiVo Service is sent, free of
charge, via your telephone line.
Connecting Your