Caution – Sony SAT-T60 User Manual
Page 19
19
Co
nnec
ting Y
o
u
r
Eq
uipm
ent
Step 1: Connecting the Satellite Dish
Antenna and Telephone Line
You must connect a DIRECTV Satellite Dish Antenna to the SATELLITE IN
REQUIRED jack to use your Satellite Receiver.
You must connect the TEL LINE jack to a telephone line wall jack to use the
DIRECTV and TiVo Service.
In
AC
S-VIDEO
TEL LINE
SERIAL
AUDIO R
AUDIO L
VIDEO
IR
OUTPUT
ACCESS CARD
SATELLITE IN
DIGITAL
AUDIO OUT
(OPTICAL)
CH
3 4
OPTIONAL
REQUIRED
CNTRL
OUT
2
1
2
1
If you have a dual LNB dish,
connect the RG-6 coaxial
cable from the second LNB
to the OPTIONAL jack.
VHF/UHF (SAT) OUT
VHF/UHF IN
POWER OFF
PASS-THRU
ONLY
VHF/UHF
POWER OFF
PASS-THRU
1
2
Satellite Receiver
RG-6 Coaxial Cable from
Satellite Dish Antenna
Telephone
Cord
2
1
Connect the TEL LINE jack to a
telephone line wall jack using the
supplied telephone cord.
Connect the SATELLITE IN
REQUIRED jack to your Satellite
Dish Antenna using RG-6 coaxial
cable (not supplied).
Note
Your Satellite Dish Antenna
installation manual provides
detailed instructions on how to
install RG-6 coaxial cable from your
Satellite Dish Antenna.
CAUTION
Only connect your authorized
Satellite Dish Antenna to the
SATELLITE IN jack as described
in the Installation Instructions.
Connecting any other equipment
to this jack could result in damage
to the equipment and/or receiver.