Connection method 4, Connection method 4: connecting to a wired network, Help guide – Sony SRS-X9 User Manual
Page 201
Personal Audio System
SRS-X9
Connection method 4: Connecting to a wired network
This section describes how to connect the speaker to a wireless router with a LAN cable (not supplied), then connect the
router to the computer.
Usually, the DHCP setting is set to ON when you connect your computer to the network.
Set the DHCP setting of your computer to ON in advance.
1. Check whether your computer and wireless router are turned on.
2. Connect the wireless router to the LAN port with a LAN cable (not supplied).
3. Connect the wireless router to your computer using another LAN cable (not supplied), or Wi-Fi connection.
4. Turn the speaker on.
The
(on/standby) indicator lights up in green, then the LINK indicator begins to flash in orange.
When the connection is completed, the LINK indicator changes from flashing to staying lit in orange.
How to Use
188