Sony SRS-X9 - Manual (Page 236)

5. Start playing back music on the iPhone/iPad/iPod touch, and adjust the volume.
The speaker starts playing back the selected song.
If playback does not start, perform the process again from step 3.
To enjoy more dynamic sound
Remove the speaker grille on the front of the speaker with the speaker grille detach tool (supplied).*
*
Keep the removed grille on a flat surface to prevent distortion.
Using the speaker or remote control during playback
You can adjust the volume using the VOL (volume) -/+ buttons of the speaker or the VOLUME +/- buttons of the remote
control.
You can also use the MUTING button, (Play/Pause) button, or / (Previous/Next) button of the remote
control.
Hint
The procedure explained above is for guideline purposes. For details, refer to the operating instructions supplied with
the device.
After the dedicated application "SongPal" is downloaded and installed to your smartphone/iPhone, you can use your
smartphone/iPhone as a remote control to operate components connected to the speaker.
The volume level set by the VOL (volume) -/+ buttons of the speaker and that set in iPhone/iPad/iPod touch are
linked.
Note
Loud sound may be output from the speaker if you set the volume too high by the iPhone/iPad/iPod touch.
In some cases, the volume level of the iPhone/iPad/iPod touch might not link with the volume level of the speaker.
Related Topic
223