Connection method 1, Help guide – Sony SRS-X9 User Manual
Page 242
Personal Audio System
SRS-X9
Connection method 1: Pairing and connecting with a BLUETOOTH device
The speaker can be paired with up to 9 BLUETOOTH devices.
It is necessary to pair a device with the speaker to be able to make BLUETOOTH connection for the first time.
Before operating the speaker, be sure to do the following:
Place the BLUETOOTH device within 1 m (3 ft) of the speaker.
Prepare the operating instructions supplied with the BLUETOOTH device for reference.
1. Turn on the speaker.
The
(on/standby) indicator lights up in green.
2. Tap the
(BLUETOOTH)
PAIRING button.
The
(BLUETOOTH) indicator begins to flash in white.
From the factory, pairing information is not stored in the speaker. In this case, if you only tap the
(BLUETOOTH)
PAIRING button, the
(BLUETOOTH) indicator will begin to flash quickly in white and the
speaker enters pairing mode automatically. In this case, proceed to step 4.
When you tap the
(BLUETOOTH)
PAIRING button, the speaker tries to make BLUETOOTH connection
with the last connected BLUETOOTH device. If the device is nearby, the BLUETOOTH connection is established
automatically and the
(BLUETOOTH) indicator stays lit. When you want to connect another BLUETOOTH
device, terminate the current BLUETOOTH connection by operating the currently connected BLUETOOTH
device.
3. Tap and hold the
(BLUETOOTH)
PAIRING button until beeps are heard.
The
(BLUETOOTH) indicator begins to flash quickly in white, and the speaker enters pairing mode.
How to Use
229