Sony SRS-X9 User Manual

Page 261

Advertising

Keep the removed grille on a flat surface to prevent distortion.

What you can do with the speaker and remote control during playback

You can adjust the volume using the VOL (volume) –/+ buttons of the speaker or the VOLUME +/- buttons of the remote

control.

You can also use the MUTING button,

(Play/Pause) button, and

(Previous/Next) button of the

remote control.

Note

If there is noise, turn off the iPhone/iPad/iPod once, then turn it on again.

The speaker supports only audio playback functions of an iPhone/iPad/iPod.

Do not connect a non-supported iPhone/iPad/iPod. Sony does not guarantee correct operation of a non-supported

iPhone/iPad/iPod.

Sony is not responsible for any loss or damage to data in an iPhone/iPad/iPod that is connected to the speaker.

Do not disconnect an iPhone/iPad/iPod during operation. To prevent damage to data, stop playback, then turn off the

power of the speaker before disconnecting the iPhone/iPad/iPod.

If sound is distorted, set the equalizer of your iPhone/iPad/iPod to “Off” or “Flat.”

Turn on the power of the iPhone or iPod touch before connecting it to the speaker; otherwise, operation will not be

possible.

Depending on the connected iPhone/iPad/iPod, loud sound may suddenly be output when the volume is adjusted.

For details on operation of the iPhone/iPad/iPod, refer to its operation manual.

When connecting to the wired network, USB function may not be available temporarily depending on the status of the

power supply of the router or network connection/disconnection. Wait until the USB function works after certain period

of time.