Sony HDR-SR1 - Manual (Page 101)

101
Trou
bl
esh
oot
in
g
“ ” is indicated on an image in the VISUAL INDEX screen.
• Loading of the data may have failed. It may be indicated correctly when you turn off the
power and then turn it on again, or repeat removing and inserting the “Memory Stick Duo” a
couple of times.
• This may appear on still images recorded on other devices, edited on a computer, etc.
• You removed the AC Adaptor or the battery pack before the ACCESS lamp is turned off after
recording. This may damage your image data and is displayed.
“ ” is indicated on an image in the VISUAL INDEX screen.
• The image data is damaged. Delete the image marked with (p. 55).
No sound or only a quiet sound is heard during playback.
• Turn up the volume (p. 45).
• Sound is not output when the LCD screen is closed. Open the LCD screen.
• When you record sound with [MICREF LEVEL] (p. 86) set to [LOW], the recorded sound
may be difficult to hear.
• You cannot record sounds during [SMTH SLW REC].
The data file name flashes.
• The file is damaged.
• The file format is not supported on your camcorder (p. 114).
You cannot view the image or hear the sound on the TV connected with the
component video cable.
• Set [COMPONENT] according to the requirements of the connected device (p. 78).
• When you are using the component video cable, make sure the red and white plugs of the A/
V connecting cable are connected (p. 49, 51).
You cannot view the image or hear the sound on the TV connected with the
HDMI cable.
• Images are not output from the HDMI OUT jack, if copyright protection signals are recorded
in the images.
You cannot hear the sound.
• When you are using the component video cable, make sure the red and white plugs of the A/
V connecting cable are connected (p. 49, 51).
• When you are using the S VIDEO plug, make sure the red and white plugs of the A/V
connecting cable are connected (p. 52).
Image data
Viewing on the TV
Continued ,