Sony HDR-SR1 - Manual (Page 98)

98
Troubleshooting (Continued)
The ACCESS lamp remains lit or flashing even when you stop recording.
• Your camcorder is recording the scene you have just shot on the hard disk.
The recording angle differs depending on the POWER switch setting position.
• The recording angle for the still image is wider than the one for the movie.
The shutter sound is not heard when you record a still image.
• Set [BEEP] to [ON] (p. 77).
• The shutter does not sound when using the Dual Rec function.
The flash does not work.
• You cannot record with the flash with:
– Capturing still images while shooting a movie
– [SMTH SLW REC]
– [FADER]
– [D.EFFECT]
– [PICT.EFFECT]
– The conversion lens (optional) attached
• Even if auto flash or (Auto redeye reduction) is selected, you cannot use the internal flash
with:
– NightShot
– [SUPER NS]
– [SPOTLIGHT], [SUNSET&MOON] or [LANDSCAPE] in [PROGRAM AE]
– [MANUAL] in [EXPOSURE]
– [SPOT METER]
The external flash (optional) does not work.
• The power of the flash is not turned on, or the flash is not attached correctly.
You cannot record still images continuously.
• You cannot record still images continuously with your camcorder.
The actual recording time for movie is less than the expected approximate
recording time of the hard disk.
• Depending on an object, such as a fast moving object, the time available for recording may
shorten (p. 19, 70).
The recording stops.
• The temperature of your camcorder is extremely high. Turn off your camcorder and leave it
for a while in a cool place.
• The temperature of your camcorder is extremely low. Turn off your camcorder and take it to
a warm place. Leave the camcorder there for a while, then turn on the camcorder.